Multiply Accumulate multiplies two register values, and adds a third register value. The least significant 32 bits of the result are written to the destination register. These 32 bits do not depend on whether the source register values are considered to be signed values or unsigned values.
In an A32 instruction, the condition flags can optionally be updated based on the result. Use of this option adversely affects performance on many implementations.
It has encodings from the following instruction sets: A32 ( A1 ) and T32 ( T1 ) .
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| != 1111 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | S | Rd | Ra | Rm | 1 | 0 | 0 | 1 | Rn | |||||||||||||||
| cond | |||||||||||||||||||||||||||||||
d = UInt(Rd); n = UInt(Rn); m = UInt(Rm); a = UInt(Ra); setflags = (S == '1'); if d == 15 || n == 15 || m == 15 || a == 15 then UNPREDICTABLE;
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 1 | 1 | 1 | 1 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | Rn | != 1111 | Rd | 0 | 0 | 0 | 0 | Rm | ||||||||||||
| Ra | |||||||||||||||||||||||||||||||
if Ra == '1111' then SEE "MUL"; d = UInt(Rd); n = UInt(Rn); m = UInt(Rm); a = UInt(Ra); setflags = FALSE; if d == 15 || n == 15 || m == 15 then UNPREDICTABLE; // Armv8-A removes UNPREDICTABLE for R13
For more information about the constrained unpredictable behavior of this instruction, see Architectural Constraints on UNPREDICTABLE behaviors.
| <c> |
| <q> |
| <Rd> |
Is the general-purpose destination register, encoded in the "Rd" field. |
| <Rn> |
Is the first general-purpose source register holding the multiplicand, encoded in the "Rn" field. |
| <Rm> |
Is the second general-purpose source register holding the multiplier, encoded in the "Rm" field. |
| <Ra> |
Is the third general-purpose source register holding the addend, encoded in the "Ra" field. |
if ConditionPassed() then EncodingSpecificOperations(); operand1 = SInt(R[n]); // operand1 = UInt(R[n]) produces the same final results operand2 = SInt(R[m]); // operand2 = UInt(R[m]) produces the same final results addend = SInt(R[a]); // addend = UInt(R[a]) produces the same final results result = operand1 * operand2 + addend; R[d] = result<31:0>; if setflags then PSTATE.N = result<31>; PSTATE.Z = IsZeroBit(result<31:0>); // PSTATE.C, PSTATE.V unchanged
If CPSR.DIT is 1, this instruction has passed its condition execution check, and does not use R15 as either its source or destination:
Internal version only: isa v01_31, pseudocode v2023-06_rel, sve v2023-06_rel ; Build timestamp: 2023-07-04T18:06
Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.