Vector Count Set Bits counts the number of bits that are one in each element in a vector, and places the results in a second vector.
The operand vector elements must be 8-bit fields.
The result vector elements are 8-bit integers.
Depending on settings in the CPACR, NSACR, and HCPTR registers, and the Security state and PE mode in which the instruction is executed, an attempt to execute the instruction might be undefined, or trapped to Hyp mode. For more information see Enabling Advanced SIMD and floating-point support.
It has encodings from the following instruction sets: A32 ( A1 ) and T32 ( T1 ) .
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
1 | 1 | 1 | 1 | 0 | 0 | 1 | 1 | 1 | D | 1 | 1 | size | 0 | 0 | Vd | 0 | 1 | 0 | 1 | 0 | Q | M | 0 | Vm |
if size != '00' then UNDEFINED; if Q == '1' && (Vd<0> == '1' || Vm<0> == '1') then UNDEFINED; esize = 8; elements = 8; d = UInt(D:Vd); m = UInt(M:Vm); regs = if Q == '0' then 1 else 2;
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | D | 1 | 1 | size | 0 | 0 | Vd | 0 | 1 | 0 | 1 | 0 | Q | M | 0 | Vm |
if size != '00' then UNDEFINED; if Q == '1' && (Vd<0> == '1' || Vm<0> == '1') then UNDEFINED; esize = 8; elements = 8; d = UInt(D:Vd); m = UInt(M:Vm); regs = if Q == '0' then 1 else 2;
<c> |
For encoding A1: see Standard assembler syntax fields. This encoding must be unconditional. |
For encoding T1: see Standard assembler syntax fields. |
<q> |
<Qd> |
Is the 128-bit name of the SIMD&FP destination register, encoded in the "D:Vd" field as <Qd>*2. |
<Qm> |
Is the 128-bit name of the SIMD&FP source register, encoded in the "M:Vm" field as <Qm>*2. |
<Dd> |
Is the 64-bit name of the SIMD&FP destination register, encoded in the "D:Vd" field. |
<Dm> |
Is the 64-bit name of the SIMD&FP source register, encoded in the "M:Vm" field. |
if ConditionPassed() then EncodingSpecificOperations(); CheckAdvSIMDEnabled(); for r = 0 to regs-1 for e = 0 to elements-1 Elem[D[d+r],e,esize] = BitCount(Elem[D[m+r],e,esize])<esize-1:0>;
If CPSR.DIT is 1 and this instruction passes its condition execution check:
Internal version only: isa v01_31, pseudocode v2023-06_rel, sve v2023-06_rel ; Build timestamp: 2023-07-04T18:06
Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.