Vector Shift Left and Insert takes each element in the operand vector, left shifts them by an immediate value, and inserts the results in the destination vector. Bits shifted out of the left of each element are lost.
The elements must all be the same size, and can be 8-bit, 16-bit, 32-bit, or 64-bit. There is no distinction between data types.
Depending on settings in the CPACR, NSACR, and HCPTR registers, and the Security state and PE mode in which the instruction is executed, an attempt to execute the instruction might be undefined, or trapped to Hyp mode. For more information see Enabling Advanced SIMD and floating-point support.
It has encodings from the following instruction sets: A32 ( A1 ) and T32 ( T1 ) .
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
1 | 1 | 1 | 1 | 0 | 0 | 1 | 1 | 1 | D | imm6 | Vd | 0 | 1 | 0 | 1 | L | Q | M | 1 | Vm |
if (L:imm6) IN {'0000xxx'} then SEE "Related encodings"; if Q == '1' && (Vd<0> == '1' || Vm<0> == '1') then UNDEFINED; integer esize; integer elements; integer shift_amount; case L:imm6 of when '0001xxx' esize = 8; elements = 8; shift_amount = UInt(imm6) - 8; when '001xxxx' esize = 16; elements = 4; shift_amount = UInt(imm6) - 16; when '01xxxxx' esize = 32; elements = 2; shift_amount = UInt(imm6) - 32; when '1xxxxxx' esize = 64; elements = 1; shift_amount = UInt(imm6); d = UInt(D:Vd); m = UInt(M:Vm); regs = if Q == '0' then 1 else 2;
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | D | imm6 | Vd | 0 | 1 | 0 | 1 | L | Q | M | 1 | Vm |
if (L:imm6) IN {'0000xxx'} then SEE "Related encodings"; if Q == '1' && (Vd<0> == '1' || Vm<0> == '1') then UNDEFINED; integer esize; integer elements; integer shift_amount; case L:imm6 of when '0001xxx' esize = 8; elements = 8; shift_amount = UInt(imm6) - 8; when '001xxxx' esize = 16; elements = 4; shift_amount = UInt(imm6) - 16; when '01xxxxx' esize = 32; elements = 2; shift_amount = UInt(imm6) - 32; when '1xxxxxx' esize = 64; elements = 1; shift_amount = UInt(imm6); d = UInt(D:Vd); m = UInt(M:Vm); regs = if Q == '0' then 1 else 2;
Related encodings: See Advanced SIMD one register and modified immediate for the T32 instruction set, or Advanced SIMD one register and modified immediate for the A32 instruction set.
<c> |
For encoding A1: see Standard assembler syntax fields. This encoding must be unconditional. |
For encoding T1: see Standard assembler syntax fields. |
<q> |
<size> |
Is the data size for the elements of the vectors,
encoded in
|
<Qd> |
Is the 128-bit name of the SIMD&FP destination register, encoded in the "D:Vd" field as <Qd>*2. |
<Qm> |
Is the 128-bit name of the SIMD&FP source register, encoded in the "M:Vm" field as <Qm>*2. |
<Dd> |
Is the 64-bit name of the SIMD&FP destination register, encoded in the "D:Vd" field. |
<Dm> |
Is the 64-bit name of the SIMD&FP source register, encoded in the "M:Vm" field. |
<imm> |
Is an immediate value, in the range 0 to <size>-1, encoded in the "imm6" field. |
if ConditionPassed() then EncodingSpecificOperations(); CheckAdvSIMDEnabled(); mask = LSL(Ones(esize), shift_amount); for r = 0 to regs-1 for e = 0 to elements-1 shifted_op = LSL(Elem[D[m+r],e,esize], shift_amount); Elem[D[d+r],e,esize] = (Elem[D[d+r],e,esize] AND NOT(mask)) OR shifted_op;
If CPSR.DIT is 1 and this instruction passes its condition execution check:
Internal version only: isa v01_31, pseudocode v2023-06_rel, sve v2023-06_rel ; Build timestamp: 2023-07-04T18:06
Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.