CTR_EL0

AArch64 System register CTR_EL0 bits [31:0] are architecturally mapped to AArch32 System register CTR[31:0].

Attributes

Field descriptions

Bits [63:38]

TminLine, bits [37:32]
When FEAT_MTE2 is implemented:

Tag minimum Line. Log₂ of the number of words covered by Allocation Tags in the smallest cache line of all caches which can contain Allocation tags that are controlled by the PE.

Note

For an implementation with cache lines containing 64 bytes of data and 4 Allocation Tags, this will be log₂(64/4) = 4.
For an implementation with Allocations Tags in separate cache lines of 128 Allocation Tags per line, this will be log₂(128*16/4) = 9.

Otherwise:

Bit [31]

Bit [30]

DIC, bit [29]

Instruction cache invalidation requirements for data to instruction coherence.

DIC	Meaning
0b0	Instruction cache invalidation to the Point of Unification is required for data to instruction coherence.
0b1	Instruction cache invalidation to the Point of Unification is not required for data to instruction coherence.

IDC, bit [28]

Data cache clean requirements for instruction to data coherence. The meaning of this bit is:

IDC	Meaning
0b0	Data cache clean to the Point of Unification is required for instruction to data coherence, unless CLIDR_EL1.LoC == 0b000 or (CLIDR_EL1.LoUIS == 0b000 && CLIDR_EL1.LoUU == 0b000).
0b1	Data cache clean to the Point of Unification is not required for instruction to data coherence.

CWG, bits [27:24]

Cache writeback granule. Log₂ of the number of words of the maximum size of memory that can be overwritten as a result of the eviction of a cache entry that has had a memory location in it modified.

A value of 0b0000 indicates that this register does not provide Cache writeback granule information and either:

The architectural maximum of 512 words (2KB) must be assumed.
The Cache writeback granule can be determined from maximum cache line size encoded in the Cache Size ID Registers.

Values greater than 0b1001 are reserved.

Arm recommends that an implementation that does not support cache write-back implements this field as 0b0001. This applies, for example, to an implementation that supports only write-through caches.

ERG, bits [23:20]

Exclusives reservation granule, and, if FEAT_TME is implemented, transactional reservation granule. Log₂ of the number of words of the maximum size of the reservation granule for the Load-Exclusive and Store-Exclusive instructions, and, if FEAT_TME is implemented, for detecting transactional conflicts.

A value of 0b0000 indicates that this register does not provide granule information and the architectural maximum of 512 words (2KB) must be assumed.

Value 0b0001 and values greater than 0b1001 are reserved.

DminLine, bits [19:16]

L1Ip, bits [15:14]

Level 1 instruction cache policy. Indicates the indexing and tagging policy for the L1 instruction cache. Possible values of this field are:

L1Ip	Meaning	Applies when
0b00	VMID aware Physical Index, Physical tag (VPIPT).	When FEAT_VPIPT is implemented
0b01	ASID-tagged Virtual Index, Virtual Tag (AIVIVT).
0b10	Virtual Index, Physical Tag (VIPT).
0b11	Physical Index, Physical Tag (PIPT).

From Armv8, the value 0b01 is reserved.

The value 0b00 is permitted only in an implementation that includes FEAT_VPIPT.

Bits [13:4]

IminLine, bits [3:0]

Accessing CTR_EL0

Accesses to this register use the following encodings in the System register encoding space:

MRS <Xt>, CTR_EL0

op0	op1	CRn	CRm	op2
0b11	0b011	0b0000	0b0000	0b001

if PSTATE.EL == EL0 then if !(EL2Enabled() && HCR_EL2.<E2H,TGE> == '11') && SCTLR_EL1.UCT == '0' then if EL2Enabled() && HCR_EL2.TGE == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else AArch64.SystemAccessTrap(EL1, 0x18); elsif EL2Enabled() && HCR_EL2.<E2H,TGE> != '11' && HCR_EL2.TID2 == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && HCR_EL2.<E2H,TGE> != '11' && IsFeatureImplemented(FEAT_FGT) && (!HaveEL(EL3) || SCR_EL3.FGTEn == '1') && HFGRTR_EL2.CTR_EL0 == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && HCR_EL2.<E2H,TGE> == '11' && SCTLR_EL2.UCT == '0' then AArch64.SystemAccessTrap(EL2, 0x18); else X[t, 64] = CTR_EL0; elsif PSTATE.EL == EL1 then if EL2Enabled() && HCR_EL2.TID2 == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && IsFeatureImplemented(FEAT_FGT) && (!HaveEL(EL3) || SCR_EL3.FGTEn == '1') && HFGRTR_EL2.CTR_EL0 == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else X[t, 64] = CTR_EL0; elsif PSTATE.EL == EL2 then X[t, 64] = CTR_EL0; elsif PSTATE.EL == EL3 then X[t, 64] = CTR_EL0;

63	62	61	60	59	58	57	56	55	54	53	52	51	50	49	48	47	46	45	44	43	42	41	40	39	38	37	36	35	34	33	32
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RES0																										TminLine
RES1	RES0	DIC	IDC	CWG				ERG				DminLine				L1Ip		RES0										IminLine

CTR_EL0, Cache Type Register

Purpose

Configuration

Attributes

Field descriptions

Bits [63:38]

TminLine, bits [37:32]
When FEAT_MTE2 is implemented:

Otherwise:

Bit [31]

Bit [30]

DIC, bit [29]

IDC, bit [28]

CWG, bits [27:24]

ERG, bits [23:20]

DminLine, bits [19:16]

L1Ip, bits [15:14]

Bits [13:4]

IminLine, bits [3:0]

Accessing CTR_EL0

MRS <Xt>, CTR_EL0

CTR_EL0, Cache Type Register

Purpose

Configuration

Attributes

Field descriptions

Bits [63:38]

TminLine, bits [37:32]When FEAT_MTE2 is implemented:

Otherwise:

Bit [31]

Bit [30]

DIC, bit [29]

IDC, bit [28]

CWG, bits [27:24]

ERG, bits [23:20]

DminLine, bits [19:16]

L1Ip, bits [15:14]

Bits [13:4]

IminLine, bits [3:0]

Accessing CTR_EL0

MRS <Xt>, CTR_EL0

TminLine, bits [37:32]
When FEAT_MTE2 is implemented: