DBGDTRTX

Transfers data from the PE to an external debugger. For example, it is used by a debug target to transfer data to the debugger. See DBGDTR_EL0 for additional architectural mappings. It is a component of the Debug Communication Channel.

Configuration

AArch64 System register DBGDTRTX_EL0 bits [31:0] are architecturally mapped to AArch32 System register DBGDTRTXint[31:0].

AArch64 System register DBGDTRTX_EL0 bits [31:0] are architecturally mapped to External register DBGDTRTX_EL0[31:0].

Attributes

Field descriptions

Bits [63:32]

Bits [31:0]

Return DTRTX.

Writes to this register:

If TXfull is set to 1, set DTRRX and DTRTX to UNKNOWN.
If TXfull is set to 0, update the value in DTRTX.

After the write, TXfull is set to 1.

For the full behavior of the Debug Communications Channel, see 'The Debug Communication Channel and Instruction Transfer Register'.

The reset behavior of this field is:

On a Cold reset, this field resets to an architecturally UNKNOWN value.

Accessing DBGDTRTX_EL0

Accesses to this register use the following encodings in the System register encoding space:

MSR DBGDTRTX_EL0, <Xt>

op0	op1	CRn	CRm	op2
0b10	0b011	0b0000	0b0101	0b000

if Halted() then DBGDTRTX_EL0 = X[t, 64]; elsif PSTATE.EL == EL0 then if MDSCR_EL1.TDCC == '1' then if EL2Enabled() && HCR_EL2.TGE == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else AArch64.SystemAccessTrap(EL1, 0x18); elsif EL2Enabled() && MDCR_EL2.TDCC == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && (HCR_EL2.TGE == '1' || MDCR_EL2.<TDE,TDA> != '00') then AArch64.SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && MDCR_EL3.TDCC == '1' then AArch64.SystemAccessTrap(EL3, 0x18); elsif HaveEL(EL3) && MDCR_EL3.TDA == '1' then AArch64.SystemAccessTrap(EL3, 0x18); else DBGDTRTX_EL0 = X[t, 64]; elsif PSTATE.EL == EL1 then if EL2Enabled() && MDCR_EL2.TDCC == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && MDCR_EL2.<TDE,TDA> != '00' then AArch64.SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && MDCR_EL3.TDCC == '1' then AArch64.SystemAccessTrap(EL3, 0x18); elsif HaveEL(EL3) && MDCR_EL3.TDA == '1' then AArch64.SystemAccessTrap(EL3, 0x18); else DBGDTRTX_EL0 = X[t, 64]; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && MDCR_EL3.TDCC == '1' then AArch64.SystemAccessTrap(EL3, 0x18); elsif HaveEL(EL3) && MDCR_EL3.TDA == '1' then AArch64.SystemAccessTrap(EL3, 0x18); else DBGDTRTX_EL0 = X[t, 64]; elsif PSTATE.EL == EL3 then DBGDTRTX_EL0 = X[t, 64];

63	62	61	60	59	58	57	56	55	54	53	52	51	50	49	48	47	46	45	44	43	42	41	40	39	38	37	36	35	34	33	32
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RES0
Return DTRTX

DBGDTRTX_EL0, Debug Data Transfer Register, Transmit