The CTICONTROL characteristics are:
Controls whether the CTI is enabled.
CTICONTROL is in the Debug power domain.
CTICONTROL is a 32-bit register.
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
RES0 | GLBEN |
Reserved, RES0.
Enables or disables the CTI mapping functions. Possible values of this field are:
GLBEN | Meaning |
---|---|
0b0 |
CTI mapping functions and application trigger disabled. |
0b1 |
CTI mapping functions and application trigger enabled. |
When GLBEN is 0, the input channel to output trigger, input trigger to output channel, and application trigger functions are disabled and do not signal new events on either output triggers or output channels. If a previously asserted output trigger has not been acknowledged, it is CONSTRAINED UNPREDICTABLE which of the following occurs:
All output triggers are disabled by CTI reset.
If the ECT supports multicycle channel events any existing output channel events will be terminated.
The reset behavior of this field is:
Component | Offset | Instance |
---|---|---|
CTI | 0x000 | CTICONTROL |
This interface is accessible as follows:
04/07/2023 11:22; 1b994cb0b8c6d1ae5a9a15edbc8bd6ce3b5c7d68
Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.