CTIITCTRL, CTI Integration mode Control register

The CTIITCTRL characteristics are:

Purpose

Enables the CTI to switch from its default mode into integration mode, where test software can control directly the inputs and outputs of the PE, for integration testing or topology detection.

Configuration

The power domain of CTIITCTRL is IMPLEMENTATION DEFINED.

Implementation of this register is OPTIONAL.

Attributes

CTIITCTRL is a 32-bit register.

Field descriptions

313029282726252423222120191817161514131211109876543210
RES0IME

Bits [31:1]

Reserved, RES0.

IME, bit [0]

Integration mode enable. When IME == 1, the device reverts to an integration mode to enable integration testing or topology detection. The integration mode behavior is IMPLEMENTATION DEFINED.

IMEMeaning
0b0

Normal operation.

0b1

Integration mode enabled.

The following resets apply:

Accessing CTIITCTRL

CTIITCTRL can be accessed through the external debug interface:

ComponentOffsetInstance
CTI0xF00CTIITCTRL

This interface is accessible as follows:


04/07/2023 11:25; 1b994cb0b8c6d1ae5a9a15edbc8bd6ce3b5c7d68

Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.