| /linux-6.3-rc2/arch/arm64/boot/dts/renesas/ |
| A D | r9a07g044c2-smarc.dts | 14 * SW1-3 : SW_SCIF_CAN (1: CAN1; 0: SCIF1)
15 * SW1-4 : SW_RSPI_CAN (1: CAN1; 0: RSPI1)
|
| A D | r9a07g043u11-smarc.dts | 14 * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1)
|
| /linux-6.3-rc2/Documentation/devicetree/bindings/net/can/ |
| A D | renesas,rcar-canfd.yaml | 125 - description: CAN1 error interrupt
126 - description: CAN1 transmit interrupt
127 - description: CAN1 transmit/receive FIFO receive completion interrupt
|
| /linux-6.3-rc2/arch/riscv/boot/dts/renesas/ |
| A D | r9a07g043f01-smarc.dts | 14 * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1)
|
| /linux-6.3-rc2/include/dt-bindings/clock/ |
| A D | xlnx-zynqmp-clk.h | 78 #define CAN1 66 macro
|
| /linux-6.3-rc2/drivers/net/can/sja1000/ |
| A D | Kconfig | 106 tristate "TS-CAN1 PC104 boards"
110 https://www.embeddedts.com/products/TS-CAN1
|
| /linux-6.3-rc2/arch/powerpc/boot/dts/ |
| A D | pcm030.dts | 31 /* PSC2 port is used by CAN1/2 */
|
| A D | pcm032.dts | 33 /* PSC2 port is used by CAN1/2 */
|
| A D | acadia.dts | 156 CAN1: can@ef601800 { label
|
| /linux-6.3-rc2/arch/arm/boot/dts/ |
| A D | r9a06g032-rzn1d400-db.dts | 33 /* Assuming CN10/CN11 are wired for CAN1 */
|
| A D | tegra30-apalis-v1.1.dtsi | 106 /* Apalis CAN1 on SPI6 */
1071 /* SPI6: CAN1 */
|
| A D | tegra30-apalis.dtsi | 105 /* Apalis CAN1 on SPI6 */
1054 /* SPI6: CAN1 */
|
| A D | at91-sam9x60ek.dts | 452 AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN /* Enable CAN1 mux */
|
| A D | imx6ull-colibri.dtsi | 485 pinctrl_gpio7: gpio7grp { /* CAN1 */
|
| A D | imx6qdl-kontron-samx6i.dtsi | 228 /* CAN1 */
|
| A D | imx7-colibri.dtsi | 811 pinctrl_gpio7: gpio7grp { /* Alternatively CAN1 */
|
| /linux-6.3-rc2/arch/arm64/boot/dts/freescale/ |
| A D | imx8mp-evk.dts | 360 "CAN1/I2C5_SEL",
384 /* GPIO 2 of PCA6416 is used to switch between CAN1 and I2C5 functions:
385 * LOW: CAN1 (default, pull-down)
|
| /linux-6.3-rc2/drivers/pinctrl/ |
| A D | pinctrl-lpc18xx.c | 259 LPC_P(1,17, GPIO, UART2, R, ENET, TIMER0, CAN1, SGPIO, R, 0, HD);
260 LPC_P(1,18, GPIO, UART2, R, ENET, TIMER0, CAN1, SGPIO, R, 0, ND);
294 LPC_P(4,8, R, CTIN, LCD, R, GPIO, LCD_ALT, CAN1, SGPIO, 0, ND);
295 LPC_P(4,9, R, CTIN, LCD, R, GPIO, LCD_ALT, CAN1, SGPIO, 0, ND);
386 LPC_P(e,0, R, R, R, EMC, GPIO, CAN1, R, R, 0, ND);
387 LPC_P(e,1, R, R, R, EMC, GPIO, CAN1, R, R, 0, ND);
|
| A D | pinctrl-ocelot.c | 1005 LAN966X_P(30, GPIO, FC3_c, CAN1, CLKMON, OB_TRG, RECO_b, NONE, R);
1006 LAN966X_P(31, GPIO, FC3_c, CAN1, CLKMON, OB_TRG, RECO_b, NONE, R);
|
| /linux-6.3-rc2/drivers/pinctrl/tegra/ |
| A D | pinctrl-tegra194.c | 1858 …PINGROUP(can1_dout_paa0, CAN1, RSVD1, RSVD2, RSVD3, 0x3000, 0, Y, -1, -1, 6, -1, 9, 10, -1, 1…
1859 …PINGROUP(can1_din_paa1, CAN1, RSVD1, RSVD2, RSVD3, 0x3008, 0, Y, -1, -1, 6, -1, 9, 10, -1, 1…
|