1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Initial setup-routines for HP 9000 based hardware.
4 *
5 * Copyright (C) 1991, 1992, 1995 Linus Torvalds
6 * Modifications for PA-RISC (C) 1999 Helge Deller <deller@gmx.de>
7 * Modifications copyright 1999 SuSE GmbH (Philipp Rumpf)
8 * Modifications copyright 2000 Martin K. Petersen <mkp@mkp.net>
9 * Modifications copyright 2000 Philipp Rumpf <prumpf@tux.org>
10 * Modifications copyright 2001 Ryan Bradetich <rbradetich@uswest.net>
11 *
12 * Initial PA-RISC Version: 04-23-1999 by Helge Deller
13 */
14
15 #include <linux/kernel.h>
16 #include <linux/initrd.h>
17 #include <linux/init.h>
18 #include <linux/console.h>
19 #include <linux/seq_file.h>
20 #define PCI_DEBUG
21 #include <linux/pci.h>
22 #undef PCI_DEBUG
23 #include <linux/proc_fs.h>
24 #include <linux/export.h>
25 #include <linux/sched.h>
26 #include <linux/sched/clock.h>
27 #include <linux/start_kernel.h>
28
29 #include <asm/cacheflush.h>
30 #include <asm/processor.h>
31 #include <asm/sections.h>
32 #include <asm/pdc.h>
33 #include <asm/led.h>
34 #include <asm/machdep.h> /* for pa7300lc_init() proto */
35 #include <asm/pdc_chassis.h>
36 #include <asm/io.h>
37 #include <asm/setup.h>
38 #include <asm/unwind.h>
39 #include <asm/smp.h>
40
41 static char __initdata command_line[COMMAND_LINE_SIZE];
42
43 /* Intended for ccio/sba/cpu statistics under /proc/bus/{runway|gsc} */
44 struct proc_dir_entry * proc_runway_root __read_mostly = NULL;
45 struct proc_dir_entry * proc_gsc_root __read_mostly = NULL;
46 struct proc_dir_entry * proc_mckinley_root __read_mostly = NULL;
47
setup_cmdline(char ** cmdline_p)48 void __init setup_cmdline(char **cmdline_p)
49 {
50 extern unsigned int boot_args[];
51 char *p;
52
53 *cmdline_p = command_line;
54
55 /* boot_args[0] is free-mem start, boot_args[1] is ptr to command line */
56 if (boot_args[0] < 64)
57 return; /* return if called from hpux boot loader */
58
59 /* Collect stuff passed in from the boot loader */
60 strscpy(boot_command_line, (char *)__va(boot_args[1]),
61 COMMAND_LINE_SIZE);
62
63 /* autodetect console type (if not done by palo yet) */
64 p = boot_command_line;
65 if (!str_has_prefix(p, "console=") && !strstr(p, " console=")) {
66 strlcat(p, " console=", COMMAND_LINE_SIZE);
67 if (PAGE0->mem_cons.cl_class == CL_DUPLEX)
68 strlcat(p, "ttyS0", COMMAND_LINE_SIZE);
69 else
70 strlcat(p, "tty0", COMMAND_LINE_SIZE);
71 }
72
73 /* default to use early console */
74 if (!strstr(p, "earlycon"))
75 strlcat(p, " earlycon=pdc", COMMAND_LINE_SIZE);
76
77 #ifdef CONFIG_BLK_DEV_INITRD
78 /* did palo pass us a ramdisk? */
79 if (boot_args[2] != 0) {
80 initrd_start = (unsigned long)__va(boot_args[2]);
81 initrd_end = (unsigned long)__va(boot_args[3]);
82 }
83 #endif
84
85 strscpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
86 }
87
88 #ifdef CONFIG_PA11
dma_ops_init(void)89 void __init dma_ops_init(void)
90 {
91 switch (boot_cpu_data.cpu_type) {
92 case pcx:
93 /*
94 * We've got way too many dependencies on 1.1 semantics
95 * to support 1.0 boxes at this point.
96 */
97 panic( "PA-RISC Linux currently only supports machines that conform to\n"
98 "the PA-RISC 1.1 or 2.0 architecture specification.\n");
99
100 case pcxl2:
101 pa7300lc_init();
102 break;
103 default:
104 break;
105 }
106 }
107 #endif
108
109 extern void collect_boot_cpu_data(void);
110
setup_arch(char ** cmdline_p)111 void __init setup_arch(char **cmdline_p)
112 {
113 #ifdef CONFIG_64BIT
114 extern int parisc_narrow_firmware;
115 #endif
116 unwind_init();
117
118 init_per_cpu(smp_processor_id()); /* Set Modes & Enable FP */
119
120 #ifdef CONFIG_64BIT
121 printk(KERN_INFO "The 64-bit Kernel has started...\n");
122 #else
123 printk(KERN_INFO "The 32-bit Kernel has started...\n");
124 #endif
125
126 printk(KERN_INFO "Kernel default page size is %d KB. Huge pages ",
127 (int)(PAGE_SIZE / 1024));
128 #ifdef CONFIG_HUGETLB_PAGE
129 printk(KERN_CONT "enabled with %d MB physical and %d MB virtual size",
130 1 << (REAL_HPAGE_SHIFT - 20), 1 << (HPAGE_SHIFT - 20));
131 #else
132 printk(KERN_CONT "disabled");
133 #endif
134 printk(KERN_CONT ".\n");
135
136 /*
137 * Check if initial kernel page mappings are sufficient.
138 * panic early if not, else we may access kernel functions
139 * and variables which can't be reached.
140 */
141 if (__pa((unsigned long) &_end) >= KERNEL_INITIAL_SIZE)
142 panic("KERNEL_INITIAL_ORDER too small!");
143
144 #ifdef CONFIG_64BIT
145 if(parisc_narrow_firmware) {
146 printk(KERN_INFO "Kernel is using PDC in 32-bit mode.\n");
147 }
148 #endif
149 setup_pdc();
150 setup_cmdline(cmdline_p);
151 collect_boot_cpu_data();
152 do_memory_inventory(); /* probe for physical memory */
153 parisc_cache_init();
154 paging_init();
155
156 #ifdef CONFIG_CHASSIS_LCD_LED
157 /* initialize the LCD/LED after boot_cpu_data is available ! */
158 led_init(); /* LCD/LED initialization */
159 #endif
160
161 #ifdef CONFIG_PA11
162 dma_ops_init();
163 #endif
164
165 clear_sched_clock_stable();
166 }
167
168 /*
169 * Display CPU info for all CPUs.
170 * for parisc this is in processor.c
171 */
172 extern int show_cpuinfo (struct seq_file *m, void *v);
173
174 static void *
c_start(struct seq_file * m,loff_t * pos)175 c_start (struct seq_file *m, loff_t *pos)
176 {
177 /* Looks like the caller will call repeatedly until we return
178 * 0, signaling EOF perhaps. This could be used to sequence
179 * through CPUs for example. Since we print all cpu info in our
180 * show_cpuinfo() disregarding 'pos' (which I assume is 'v' above)
181 * we only allow for one "position". */
182 return ((long)*pos < 1) ? (void *)1 : NULL;
183 }
184
185 static void *
c_next(struct seq_file * m,void * v,loff_t * pos)186 c_next (struct seq_file *m, void *v, loff_t *pos)
187 {
188 ++*pos;
189 return c_start(m, pos);
190 }
191
192 static void
c_stop(struct seq_file * m,void * v)193 c_stop (struct seq_file *m, void *v)
194 {
195 }
196
197 const struct seq_operations cpuinfo_op = {
198 .start = c_start,
199 .next = c_next,
200 .stop = c_stop,
201 .show = show_cpuinfo
202 };
203
parisc_proc_mkdir(void)204 static void __init parisc_proc_mkdir(void)
205 {
206 /*
207 ** Can't call proc_mkdir() until after proc_root_init() has been
208 ** called by start_kernel(). In other words, this code can't
209 ** live in arch/.../setup.c because start_parisc() calls
210 ** start_kernel().
211 */
212 switch (boot_cpu_data.cpu_type) {
213 case pcxl:
214 case pcxl2:
215 if (NULL == proc_gsc_root)
216 {
217 proc_gsc_root = proc_mkdir("bus/gsc", NULL);
218 }
219 break;
220 case pcxt_:
221 case pcxu:
222 case pcxu_:
223 case pcxw:
224 case pcxw_:
225 case pcxw2:
226 if (NULL == proc_runway_root)
227 {
228 proc_runway_root = proc_mkdir("bus/runway", NULL);
229 }
230 break;
231 case mako:
232 case mako2:
233 if (NULL == proc_mckinley_root)
234 {
235 proc_mckinley_root = proc_mkdir("bus/mckinley", NULL);
236 }
237 break;
238 default:
239 /* FIXME: this was added to prevent the compiler
240 * complaining about missing pcx, pcxs and pcxt
241 * I'm assuming they have neither gsc nor runway */
242 break;
243 }
244 }
245
246 static struct resource central_bus = {
247 .name = "Central Bus",
248 .start = F_EXTEND(0xfff80000),
249 .end = F_EXTEND(0xfffaffff),
250 .flags = IORESOURCE_MEM,
251 };
252
253 static struct resource local_broadcast = {
254 .name = "Local Broadcast",
255 .start = F_EXTEND(0xfffb0000),
256 .end = F_EXTEND(0xfffdffff),
257 .flags = IORESOURCE_MEM,
258 };
259
260 static struct resource global_broadcast = {
261 .name = "Global Broadcast",
262 .start = F_EXTEND(0xfffe0000),
263 .end = F_EXTEND(0xffffffff),
264 .flags = IORESOURCE_MEM,
265 };
266
parisc_init_resources(void)267 static int __init parisc_init_resources(void)
268 {
269 int result;
270
271 result = request_resource(&iomem_resource, ¢ral_bus);
272 if (result < 0) {
273 printk(KERN_ERR
274 "%s: failed to claim %s address space!\n",
275 __FILE__, central_bus.name);
276 return result;
277 }
278
279 result = request_resource(&iomem_resource, &local_broadcast);
280 if (result < 0) {
281 printk(KERN_ERR
282 "%s: failed to claim %s address space!\n",
283 __FILE__, local_broadcast.name);
284 return result;
285 }
286
287 result = request_resource(&iomem_resource, &global_broadcast);
288 if (result < 0) {
289 printk(KERN_ERR
290 "%s: failed to claim %s address space!\n",
291 __FILE__, global_broadcast.name);
292 return result;
293 }
294
295 return 0;
296 }
297
298 extern void gsc_init(void);
299 extern void processor_init(void);
300 extern void ccio_init(void);
301 extern void hppb_init(void);
302 extern void dino_init(void);
303 extern void iosapic_init(void);
304 extern void lba_init(void);
305 extern void sba_init(void);
306 extern void eisa_init(void);
307
parisc_init(void)308 static int __init parisc_init(void)
309 {
310 u32 osid = (OS_ID_LINUX << 16);
311
312 parisc_proc_mkdir();
313 parisc_init_resources();
314 do_device_inventory(); /* probe for hardware */
315
316 parisc_pdc_chassis_init();
317
318 /* set up a new led state on systems shipped LED State panel */
319 pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BSTART);
320
321 /* tell PDC we're Linux. Nevermind failure. */
322 pdc_stable_write(0x40, &osid, sizeof(osid));
323
324 /* start with known state */
325 flush_cache_all_local();
326 flush_tlb_all_local(NULL);
327
328 processor_init();
329 #ifdef CONFIG_SMP
330 pr_info("CPU(s): %d out of %d %s at %d.%06d MHz online\n",
331 num_online_cpus(), num_present_cpus(),
332 #else
333 pr_info("CPU(s): 1 x %s at %d.%06d MHz\n",
334 #endif
335 boot_cpu_data.cpu_name,
336 boot_cpu_data.cpu_hz / 1000000,
337 boot_cpu_data.cpu_hz % 1000000 );
338
339 #if defined(CONFIG_64BIT) && defined(CONFIG_SMP)
340 /* Don't serialize TLB flushes if we run on one CPU only. */
341 if (num_online_cpus() == 1)
342 pa_serialize_tlb_flushes = 0;
343 #endif
344
345 apply_alternatives_all();
346 parisc_setup_cache_timing();
347
348 /* These are in a non-obvious order, will fix when we have an iotree */
349 #if defined(CONFIG_IOSAPIC)
350 iosapic_init();
351 #endif
352 #if defined(CONFIG_IOMMU_SBA)
353 sba_init();
354 #endif
355 #if defined(CONFIG_PCI_LBA)
356 lba_init();
357 #endif
358
359 /* CCIO before any potential subdevices */
360 #if defined(CONFIG_IOMMU_CCIO)
361 ccio_init();
362 #endif
363
364 /*
365 * Need to register Asp & Wax before the EISA adapters for the IRQ
366 * regions. EISA must come before PCI to be sure it gets IRQ region
367 * 0.
368 */
369 #if defined(CONFIG_GSC_LASI) || defined(CONFIG_GSC_WAX)
370 gsc_init();
371 #endif
372 #ifdef CONFIG_EISA
373 eisa_init();
374 #endif
375
376 #if defined(CONFIG_HPPB)
377 hppb_init();
378 #endif
379
380 #if defined(CONFIG_GSC_DINO)
381 dino_init();
382 #endif
383
384 #ifdef CONFIG_CHASSIS_LCD_LED
385 register_led_regions(); /* register LED port info in procfs */
386 #endif
387
388 return 0;
389 }
390 arch_initcall(parisc_init);
391
start_parisc(void)392 void __init start_parisc(void)
393 {
394 extern void early_trap_init(void);
395
396 int ret, cpunum;
397 struct pdc_coproc_cfg coproc_cfg;
398
399 /* check QEMU/SeaBIOS marker in PAGE0 */
400 running_on_qemu = (memcmp(&PAGE0->pad0, "SeaBIOS", 8) == 0);
401
402 cpunum = smp_processor_id();
403
404 init_cpu_topology();
405
406 set_firmware_width_unlocked();
407
408 ret = pdc_coproc_cfg_unlocked(&coproc_cfg);
409 if (ret >= 0 && coproc_cfg.ccr_functional) {
410 mtctl(coproc_cfg.ccr_functional, 10);
411
412 per_cpu(cpu_data, cpunum).fp_rev = coproc_cfg.revision;
413 per_cpu(cpu_data, cpunum).fp_model = coproc_cfg.model;
414
415 asm volatile ("fstd %fr0,8(%sp)");
416 } else {
417 panic("must have an fpu to boot linux");
418 }
419
420 early_trap_init(); /* initialize checksum of fault_vector */
421
422 start_kernel();
423 // not reached
424 }
425