1  /* SPDX-License-Identifier: GPL-2.0 */
2  /*
3   * ethtool.h: Defines for Linux ethtool.
4   *
5   * Copyright (C) 1998 David S. Miller (davem@redhat.com)
6   * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
7   * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
8   * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
9   *                                christopher.leech@intel.com,
10   *                                scott.feldman@intel.com)
11   * Portions Copyright (C) Sun Microsystems 2008
12   */
13  #ifndef _LINUX_ETHTOOL_H
14  #define _LINUX_ETHTOOL_H
15  
16  #include <linux/bitmap.h>
17  #include <linux/compat.h>
18  #include <linux/if_ether.h>
19  #include <linux/netlink.h>
20  #include <uapi/linux/ethtool.h>
21  
22  struct compat_ethtool_rx_flow_spec {
23  	u32		flow_type;
24  	union ethtool_flow_union h_u;
25  	struct ethtool_flow_ext h_ext;
26  	union ethtool_flow_union m_u;
27  	struct ethtool_flow_ext m_ext;
28  	compat_u64	ring_cookie;
29  	u32		location;
30  };
31  
32  struct compat_ethtool_rxnfc {
33  	u32				cmd;
34  	u32				flow_type;
35  	compat_u64			data;
36  	struct compat_ethtool_rx_flow_spec fs;
37  	u32				rule_cnt;
38  	u32				rule_locs[];
39  };
40  
41  #include <linux/rculist.h>
42  
43  /**
44   * enum ethtool_phys_id_state - indicator state for physical identification
45   * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
46   * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
47   * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
48   *	is not supported)
49   * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
50   *	is not supported)
51   */
52  enum ethtool_phys_id_state {
53  	ETHTOOL_ID_INACTIVE,
54  	ETHTOOL_ID_ACTIVE,
55  	ETHTOOL_ID_ON,
56  	ETHTOOL_ID_OFF
57  };
58  
59  enum {
60  	ETH_RSS_HASH_TOP_BIT, /* Configurable RSS hash function - Toeplitz */
61  	ETH_RSS_HASH_XOR_BIT, /* Configurable RSS hash function - Xor */
62  	ETH_RSS_HASH_CRC32_BIT, /* Configurable RSS hash function - Crc32 */
63  
64  	/*
65  	 * Add your fresh new hash function bits above and remember to update
66  	 * rss_hash_func_strings[] in ethtool.c
67  	 */
68  	ETH_RSS_HASH_FUNCS_COUNT
69  };
70  
71  /**
72   * struct kernel_ethtool_ringparam - RX/TX ring configuration
73   * @rx_buf_len: Current length of buffers on the rx ring.
74   * @tcp_data_split: Scatter packet headers and data to separate buffers
75   * @tx_push: The flag of tx push mode
76   * @rx_push: The flag of rx push mode
77   * @cqe_size: Size of TX/RX completion queue event
78   */
79  struct kernel_ethtool_ringparam {
80  	u32	rx_buf_len;
81  	u8	tcp_data_split;
82  	u8	tx_push;
83  	u8	rx_push;
84  	u32	cqe_size;
85  };
86  
87  /**
88   * enum ethtool_supported_ring_param - indicator caps for setting ring params
89   * @ETHTOOL_RING_USE_RX_BUF_LEN: capture for setting rx_buf_len
90   * @ETHTOOL_RING_USE_CQE_SIZE: capture for setting cqe_size
91   * @ETHTOOL_RING_USE_TX_PUSH: capture for setting tx_push
92   * @ETHTOOL_RING_USE_RX_PUSH: capture for setting rx_push
93   */
94  enum ethtool_supported_ring_param {
95  	ETHTOOL_RING_USE_RX_BUF_LEN = BIT(0),
96  	ETHTOOL_RING_USE_CQE_SIZE   = BIT(1),
97  	ETHTOOL_RING_USE_TX_PUSH    = BIT(2),
98  	ETHTOOL_RING_USE_RX_PUSH    = BIT(3),
99  };
100  
101  #define __ETH_RSS_HASH_BIT(bit)	((u32)1 << (bit))
102  #define __ETH_RSS_HASH(name)	__ETH_RSS_HASH_BIT(ETH_RSS_HASH_##name##_BIT)
103  
104  #define ETH_RSS_HASH_TOP	__ETH_RSS_HASH(TOP)
105  #define ETH_RSS_HASH_XOR	__ETH_RSS_HASH(XOR)
106  #define ETH_RSS_HASH_CRC32	__ETH_RSS_HASH(CRC32)
107  
108  #define ETH_RSS_HASH_UNKNOWN	0
109  #define ETH_RSS_HASH_NO_CHANGE	0
110  
111  struct net_device;
112  struct netlink_ext_ack;
113  
114  /* Link extended state and substate. */
115  struct ethtool_link_ext_state_info {
116  	enum ethtool_link_ext_state link_ext_state;
117  	union {
118  		enum ethtool_link_ext_substate_autoneg autoneg;
119  		enum ethtool_link_ext_substate_link_training link_training;
120  		enum ethtool_link_ext_substate_link_logical_mismatch link_logical_mismatch;
121  		enum ethtool_link_ext_substate_bad_signal_integrity bad_signal_integrity;
122  		enum ethtool_link_ext_substate_cable_issue cable_issue;
123  		enum ethtool_link_ext_substate_module module;
124  		u32 __link_ext_substate;
125  	};
126  };
127  
128  struct ethtool_link_ext_stats {
129  	/* Custom Linux statistic for PHY level link down events.
130  	 * In a simpler world it should be equal to netdev->carrier_down_count
131  	 * unfortunately netdev also counts local reconfigurations which don't
132  	 * actually take the physical link down, not to mention NC-SI which,
133  	 * if present, keeps the link up regardless of host state.
134  	 * This statistic counts when PHY _actually_ went down, or lost link.
135  	 *
136  	 * Note that we need u64 for ethtool_stats_init() and comparisons
137  	 * to ETHTOOL_STAT_NOT_SET, but only u32 is exposed to the user.
138  	 */
139  	u64 link_down_events;
140  };
141  
142  /**
143   * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
144   * @index: Index in RX flow hash indirection table
145   * @n_rx_rings: Number of RX rings to use
146   *
147   * This function provides the default policy for RX flow hash indirection.
148   */
ethtool_rxfh_indir_default(u32 index,u32 n_rx_rings)149  static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
150  {
151  	return index % n_rx_rings;
152  }
153  
154  /* declare a link mode bitmap */
155  #define __ETHTOOL_DECLARE_LINK_MODE_MASK(name)		\
156  	DECLARE_BITMAP(name, __ETHTOOL_LINK_MODE_MASK_NBITS)
157  
158  /* drivers must ignore base.cmd and base.link_mode_masks_nwords
159   * fields, but they are allowed to overwrite them (will be ignored).
160   */
161  struct ethtool_link_ksettings {
162  	struct ethtool_link_settings base;
163  	struct {
164  		__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
165  		__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
166  		__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
167  	} link_modes;
168  	u32	lanes;
169  };
170  
171  /**
172   * ethtool_link_ksettings_zero_link_mode - clear link_ksettings link mode mask
173   *   @ptr : pointer to struct ethtool_link_ksettings
174   *   @name : one of supported/advertising/lp_advertising
175   */
176  #define ethtool_link_ksettings_zero_link_mode(ptr, name)		\
177  	bitmap_zero((ptr)->link_modes.name, __ETHTOOL_LINK_MODE_MASK_NBITS)
178  
179  /**
180   * ethtool_link_ksettings_add_link_mode - set bit in link_ksettings
181   * link mode mask
182   *   @ptr : pointer to struct ethtool_link_ksettings
183   *   @name : one of supported/advertising/lp_advertising
184   *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
185   * (not atomic, no bound checking)
186   */
187  #define ethtool_link_ksettings_add_link_mode(ptr, name, mode)		\
188  	__set_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
189  
190  /**
191   * ethtool_link_ksettings_del_link_mode - clear bit in link_ksettings
192   * link mode mask
193   *   @ptr : pointer to struct ethtool_link_ksettings
194   *   @name : one of supported/advertising/lp_advertising
195   *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
196   * (not atomic, no bound checking)
197   */
198  #define ethtool_link_ksettings_del_link_mode(ptr, name, mode)		\
199  	__clear_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
200  
201  /**
202   * ethtool_link_ksettings_test_link_mode - test bit in ksettings link mode mask
203   *   @ptr : pointer to struct ethtool_link_ksettings
204   *   @name : one of supported/advertising/lp_advertising
205   *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
206   * (not atomic, no bound checking)
207   *
208   * Returns true/false.
209   */
210  #define ethtool_link_ksettings_test_link_mode(ptr, name, mode)		\
211  	test_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
212  
213  extern int
214  __ethtool_get_link_ksettings(struct net_device *dev,
215  			     struct ethtool_link_ksettings *link_ksettings);
216  
217  struct kernel_ethtool_coalesce {
218  	u8 use_cqe_mode_tx;
219  	u8 use_cqe_mode_rx;
220  	u32 tx_aggr_max_bytes;
221  	u32 tx_aggr_max_frames;
222  	u32 tx_aggr_time_usecs;
223  };
224  
225  /**
226   * ethtool_intersect_link_masks - Given two link masks, AND them together
227   * @dst: first mask and where result is stored
228   * @src: second mask to intersect with
229   *
230   * Given two link mode masks, AND them together and save the result in dst.
231   */
232  void ethtool_intersect_link_masks(struct ethtool_link_ksettings *dst,
233  				  struct ethtool_link_ksettings *src);
234  
235  void ethtool_convert_legacy_u32_to_link_mode(unsigned long *dst,
236  					     u32 legacy_u32);
237  
238  /* return false if src had higher bits set. lower bits always updated. */
239  bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
240  				     const unsigned long *src);
241  
242  #define ETHTOOL_COALESCE_RX_USECS		BIT(0)
243  #define ETHTOOL_COALESCE_RX_MAX_FRAMES		BIT(1)
244  #define ETHTOOL_COALESCE_RX_USECS_IRQ		BIT(2)
245  #define ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ	BIT(3)
246  #define ETHTOOL_COALESCE_TX_USECS		BIT(4)
247  #define ETHTOOL_COALESCE_TX_MAX_FRAMES		BIT(5)
248  #define ETHTOOL_COALESCE_TX_USECS_IRQ		BIT(6)
249  #define ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ	BIT(7)
250  #define ETHTOOL_COALESCE_STATS_BLOCK_USECS	BIT(8)
251  #define ETHTOOL_COALESCE_USE_ADAPTIVE_RX	BIT(9)
252  #define ETHTOOL_COALESCE_USE_ADAPTIVE_TX	BIT(10)
253  #define ETHTOOL_COALESCE_PKT_RATE_LOW		BIT(11)
254  #define ETHTOOL_COALESCE_RX_USECS_LOW		BIT(12)
255  #define ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW	BIT(13)
256  #define ETHTOOL_COALESCE_TX_USECS_LOW		BIT(14)
257  #define ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW	BIT(15)
258  #define ETHTOOL_COALESCE_PKT_RATE_HIGH		BIT(16)
259  #define ETHTOOL_COALESCE_RX_USECS_HIGH		BIT(17)
260  #define ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH	BIT(18)
261  #define ETHTOOL_COALESCE_TX_USECS_HIGH		BIT(19)
262  #define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH	BIT(20)
263  #define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL	BIT(21)
264  #define ETHTOOL_COALESCE_USE_CQE_RX		BIT(22)
265  #define ETHTOOL_COALESCE_USE_CQE_TX		BIT(23)
266  #define ETHTOOL_COALESCE_TX_AGGR_MAX_BYTES	BIT(24)
267  #define ETHTOOL_COALESCE_TX_AGGR_MAX_FRAMES	BIT(25)
268  #define ETHTOOL_COALESCE_TX_AGGR_TIME_USECS	BIT(26)
269  #define ETHTOOL_COALESCE_ALL_PARAMS		GENMASK(26, 0)
270  
271  #define ETHTOOL_COALESCE_USECS						\
272  	(ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS)
273  #define ETHTOOL_COALESCE_MAX_FRAMES					\
274  	(ETHTOOL_COALESCE_RX_MAX_FRAMES | ETHTOOL_COALESCE_TX_MAX_FRAMES)
275  #define ETHTOOL_COALESCE_USECS_IRQ					\
276  	(ETHTOOL_COALESCE_RX_USECS_IRQ | ETHTOOL_COALESCE_TX_USECS_IRQ)
277  #define ETHTOOL_COALESCE_MAX_FRAMES_IRQ		\
278  	(ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ |	\
279  	 ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ)
280  #define ETHTOOL_COALESCE_USE_ADAPTIVE					\
281  	(ETHTOOL_COALESCE_USE_ADAPTIVE_RX | ETHTOOL_COALESCE_USE_ADAPTIVE_TX)
282  #define ETHTOOL_COALESCE_USECS_LOW_HIGH					\
283  	(ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_TX_USECS_LOW | \
284  	 ETHTOOL_COALESCE_RX_USECS_HIGH | ETHTOOL_COALESCE_TX_USECS_HIGH)
285  #define ETHTOOL_COALESCE_MAX_FRAMES_LOW_HIGH	\
286  	(ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW |	\
287  	 ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW |	\
288  	 ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH |	\
289  	 ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH)
290  #define ETHTOOL_COALESCE_PKT_RATE_RX_USECS				\
291  	(ETHTOOL_COALESCE_USE_ADAPTIVE_RX |				\
292  	 ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_RX_USECS_HIGH | \
293  	 ETHTOOL_COALESCE_PKT_RATE_LOW | ETHTOOL_COALESCE_PKT_RATE_HIGH | \
294  	 ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL)
295  #define ETHTOOL_COALESCE_USE_CQE					\
296  	(ETHTOOL_COALESCE_USE_CQE_RX | ETHTOOL_COALESCE_USE_CQE_TX)
297  #define ETHTOOL_COALESCE_TX_AGGR		\
298  	(ETHTOOL_COALESCE_TX_AGGR_MAX_BYTES |	\
299  	 ETHTOOL_COALESCE_TX_AGGR_MAX_FRAMES |	\
300  	 ETHTOOL_COALESCE_TX_AGGR_TIME_USECS)
301  
302  #define ETHTOOL_STAT_NOT_SET	(~0ULL)
303  
ethtool_stats_init(u64 * stats,unsigned int n)304  static inline void ethtool_stats_init(u64 *stats, unsigned int n)
305  {
306  	while (n--)
307  		stats[n] = ETHTOOL_STAT_NOT_SET;
308  }
309  
310  /* Basic IEEE 802.3 MAC statistics (30.3.1.1.*), not otherwise exposed
311   * via a more targeted API.
312   */
313  struct ethtool_eth_mac_stats {
314  	enum ethtool_mac_stats_src src;
315  	struct_group(stats,
316  		u64 FramesTransmittedOK;
317  		u64 SingleCollisionFrames;
318  		u64 MultipleCollisionFrames;
319  		u64 FramesReceivedOK;
320  		u64 FrameCheckSequenceErrors;
321  		u64 AlignmentErrors;
322  		u64 OctetsTransmittedOK;
323  		u64 FramesWithDeferredXmissions;
324  		u64 LateCollisions;
325  		u64 FramesAbortedDueToXSColls;
326  		u64 FramesLostDueToIntMACXmitError;
327  		u64 CarrierSenseErrors;
328  		u64 OctetsReceivedOK;
329  		u64 FramesLostDueToIntMACRcvError;
330  		u64 MulticastFramesXmittedOK;
331  		u64 BroadcastFramesXmittedOK;
332  		u64 FramesWithExcessiveDeferral;
333  		u64 MulticastFramesReceivedOK;
334  		u64 BroadcastFramesReceivedOK;
335  		u64 InRangeLengthErrors;
336  		u64 OutOfRangeLengthField;
337  		u64 FrameTooLongErrors;
338  	);
339  };
340  
341  /* Basic IEEE 802.3 PHY statistics (30.3.2.1.*), not otherwise exposed
342   * via a more targeted API.
343   */
344  struct ethtool_eth_phy_stats {
345  	enum ethtool_mac_stats_src src;
346  	struct_group(stats,
347  		u64 SymbolErrorDuringCarrier;
348  	);
349  };
350  
351  /* Basic IEEE 802.3 MAC Ctrl statistics (30.3.3.*), not otherwise exposed
352   * via a more targeted API.
353   */
354  struct ethtool_eth_ctrl_stats {
355  	enum ethtool_mac_stats_src src;
356  	struct_group(stats,
357  		u64 MACControlFramesTransmitted;
358  		u64 MACControlFramesReceived;
359  		u64 UnsupportedOpcodesReceived;
360  	);
361  };
362  
363  /**
364   * struct ethtool_pause_stats - statistics for IEEE 802.3x pause frames
365   * @src: input field denoting whether stats should be queried from the eMAC or
366   *	pMAC (if the MM layer is supported). To be ignored otherwise.
367   * @tx_pause_frames: transmitted pause frame count. Reported to user space
368   *	as %ETHTOOL_A_PAUSE_STAT_TX_FRAMES.
369   *
370   *	Equivalent to `30.3.4.2 aPAUSEMACCtrlFramesTransmitted`
371   *	from the standard.
372   *
373   * @rx_pause_frames: received pause frame count. Reported to user space
374   *	as %ETHTOOL_A_PAUSE_STAT_RX_FRAMES. Equivalent to:
375   *
376   *	Equivalent to `30.3.4.3 aPAUSEMACCtrlFramesReceived`
377   *	from the standard.
378   */
379  struct ethtool_pause_stats {
380  	enum ethtool_mac_stats_src src;
381  	struct_group(stats,
382  		u64 tx_pause_frames;
383  		u64 rx_pause_frames;
384  	);
385  };
386  
387  #define ETHTOOL_MAX_LANES	8
388  
389  /**
390   * struct ethtool_fec_stats - statistics for IEEE 802.3 FEC
391   * @corrected_blocks: number of received blocks corrected by FEC
392   *	Reported to user space as %ETHTOOL_A_FEC_STAT_CORRECTED.
393   *
394   *	Equivalent to `30.5.1.1.17 aFECCorrectedBlocks` from the standard.
395   *
396   * @uncorrectable_blocks: number of received blocks FEC was not able to correct
397   *	Reported to user space as %ETHTOOL_A_FEC_STAT_UNCORR.
398   *
399   *	Equivalent to `30.5.1.1.18 aFECUncorrectableBlocks` from the standard.
400   *
401   * @corrected_bits: number of bits corrected by FEC
402   *	Similar to @corrected_blocks but counts individual bit changes,
403   *	not entire FEC data blocks. This is a non-standard statistic.
404   *	Reported to user space as %ETHTOOL_A_FEC_STAT_CORR_BITS.
405   *
406   * @lane: per-lane/PCS-instance counts as defined by the standard
407   * @total: error counts for the entire port, for drivers incapable of reporting
408   *	per-lane stats
409   *
410   * Drivers should fill in either only total or per-lane statistics, core
411   * will take care of adding lane values up to produce the total.
412   */
413  struct ethtool_fec_stats {
414  	struct ethtool_fec_stat {
415  		u64 total;
416  		u64 lanes[ETHTOOL_MAX_LANES];
417  	} corrected_blocks, uncorrectable_blocks, corrected_bits;
418  };
419  
420  /**
421   * struct ethtool_rmon_hist_range - byte range for histogram statistics
422   * @low: low bound of the bucket (inclusive)
423   * @high: high bound of the bucket (inclusive)
424   */
425  struct ethtool_rmon_hist_range {
426  	u16 low;
427  	u16 high;
428  };
429  
430  #define ETHTOOL_RMON_HIST_MAX	10
431  
432  /**
433   * struct ethtool_rmon_stats - selected RMON (RFC 2819) statistics
434   * @src: input field denoting whether stats should be queried from the eMAC or
435   *	pMAC (if the MM layer is supported). To be ignored otherwise.
436   * @undersize_pkts: Equivalent to `etherStatsUndersizePkts` from the RFC.
437   * @oversize_pkts: Equivalent to `etherStatsOversizePkts` from the RFC.
438   * @fragments: Equivalent to `etherStatsFragments` from the RFC.
439   * @jabbers: Equivalent to `etherStatsJabbers` from the RFC.
440   * @hist: Packet counter for packet length buckets (e.g.
441   *	`etherStatsPkts128to255Octets` from the RFC).
442   * @hist_tx: Tx counters in similar form to @hist, not defined in the RFC.
443   *
444   * Selection of RMON (RFC 2819) statistics which are not exposed via different
445   * APIs, primarily the packet-length-based counters.
446   * Unfortunately different designs choose different buckets beyond
447   * the 1024B mark (jumbo frame teritory), so the definition of the bucket
448   * ranges is left to the driver.
449   */
450  struct ethtool_rmon_stats {
451  	enum ethtool_mac_stats_src src;
452  	struct_group(stats,
453  		u64 undersize_pkts;
454  		u64 oversize_pkts;
455  		u64 fragments;
456  		u64 jabbers;
457  
458  		u64 hist[ETHTOOL_RMON_HIST_MAX];
459  		u64 hist_tx[ETHTOOL_RMON_HIST_MAX];
460  	);
461  };
462  
463  #define ETH_MODULE_EEPROM_PAGE_LEN	128
464  #define ETH_MODULE_MAX_I2C_ADDRESS	0x7f
465  
466  /**
467   * struct ethtool_module_eeprom - EEPROM dump from specified page
468   * @offset: Offset within the specified EEPROM page to begin read, in bytes.
469   * @length: Number of bytes to read.
470   * @page: Page number to read from.
471   * @bank: Page bank number to read from, if applicable by EEPROM spec.
472   * @i2c_address: I2C address of a page. Value less than 0x7f expected. Most
473   *	EEPROMs use 0x50 or 0x51.
474   * @data: Pointer to buffer with EEPROM data of @length size.
475   *
476   * This can be used to manage pages during EEPROM dump in ethtool and pass
477   * required information to the driver.
478   */
479  struct ethtool_module_eeprom {
480  	u32	offset;
481  	u32	length;
482  	u8	page;
483  	u8	bank;
484  	u8	i2c_address;
485  	u8	*data;
486  };
487  
488  /**
489   * struct ethtool_module_power_mode_params - module power mode parameters
490   * @policy: The power mode policy enforced by the host for the plug-in module.
491   * @mode: The operational power mode of the plug-in module. Should be filled by
492   *	device drivers on get operations.
493   */
494  struct ethtool_module_power_mode_params {
495  	enum ethtool_module_power_mode_policy policy;
496  	enum ethtool_module_power_mode mode;
497  };
498  
499  /**
500   * struct ethtool_mm_state - 802.3 MAC merge layer state
501   * @verify_time:
502   *	wait time between verification attempts in ms (according to clause
503   *	30.14.1.6 aMACMergeVerifyTime)
504   * @max_verify_time:
505   *	maximum accepted value for the @verify_time variable in set requests
506   * @verify_status:
507   *	state of the verification state machine of the MM layer (according to
508   *	clause 30.14.1.2 aMACMergeStatusVerify)
509   * @tx_enabled:
510   *	set if the MM layer is administratively enabled in the TX direction
511   *	(according to clause 30.14.1.3 aMACMergeEnableTx)
512   * @tx_active:
513   *	set if the MM layer is enabled in the TX direction, which makes FP
514   *	possible (according to 30.14.1.5 aMACMergeStatusTx). This should be
515   *	true if MM is enabled, and the verification status is either verified,
516   *	or disabled.
517   * @pmac_enabled:
518   *	set if the preemptible MAC is powered on and is able to receive
519   *	preemptible packets and respond to verification frames.
520   * @verify_enabled:
521   *	set if the Verify function of the MM layer (which sends SMD-V
522   *	verification requests) is administratively enabled (regardless of
523   *	whether it is currently in the ETHTOOL_MM_VERIFY_STATUS_DISABLED state
524   *	or not), according to clause 30.14.1.4 aMACMergeVerifyDisableTx (but
525   *	using positive rather than negative logic). The device should always
526   *	respond to received SMD-V requests as long as @pmac_enabled is set.
527   * @tx_min_frag_size:
528   *	the minimum size of non-final mPacket fragments that the link partner
529   *	supports receiving, expressed in octets. Compared to the definition
530   *	from clause 30.14.1.7 aMACMergeAddFragSize which is expressed in the
531   *	range 0 to 3 (requiring a translation to the size in octets according
532   *	to the formula 64 * (1 + addFragSize) - 4), a value in a continuous and
533   *	unbounded range can be specified here.
534   * @rx_min_frag_size:
535   *	the minimum size of non-final mPacket fragments that this device
536   *	supports receiving, expressed in octets.
537   */
538  struct ethtool_mm_state {
539  	u32 verify_time;
540  	u32 max_verify_time;
541  	enum ethtool_mm_verify_status verify_status;
542  	bool tx_enabled;
543  	bool tx_active;
544  	bool pmac_enabled;
545  	bool verify_enabled;
546  	u32 tx_min_frag_size;
547  	u32 rx_min_frag_size;
548  };
549  
550  /**
551   * struct ethtool_mm_cfg - 802.3 MAC merge layer configuration
552   * @verify_time: see struct ethtool_mm_state
553   * @verify_enabled: see struct ethtool_mm_state
554   * @tx_enabled: see struct ethtool_mm_state
555   * @pmac_enabled: see struct ethtool_mm_state
556   * @tx_min_frag_size: see struct ethtool_mm_state
557   */
558  struct ethtool_mm_cfg {
559  	u32 verify_time;
560  	bool verify_enabled;
561  	bool tx_enabled;
562  	bool pmac_enabled;
563  	u32 tx_min_frag_size;
564  };
565  
566  /**
567   * struct ethtool_mm_stats - 802.3 MAC merge layer statistics
568   * @MACMergeFrameAssErrorCount:
569   *	received MAC frames with reassembly errors
570   * @MACMergeFrameSmdErrorCount:
571   *	received MAC frames/fragments rejected due to unknown or incorrect SMD
572   * @MACMergeFrameAssOkCount:
573   *	received MAC frames that were successfully reassembled and passed up
574   * @MACMergeFragCountRx:
575   *	number of additional correct SMD-C mPackets received due to preemption
576   * @MACMergeFragCountTx:
577   *	number of additional mPackets sent due to preemption
578   * @MACMergeHoldCount:
579   *	number of times the MM layer entered the HOLD state, which blocks
580   *	transmission of preemptible traffic
581   */
582  struct ethtool_mm_stats {
583  	u64 MACMergeFrameAssErrorCount;
584  	u64 MACMergeFrameSmdErrorCount;
585  	u64 MACMergeFrameAssOkCount;
586  	u64 MACMergeFragCountRx;
587  	u64 MACMergeFragCountTx;
588  	u64 MACMergeHoldCount;
589  };
590  
591  /**
592   * struct ethtool_ops - optional netdev operations
593   * @cap_link_lanes_supported: indicates if the driver supports lanes
594   *	parameter.
595   * @supported_coalesce_params: supported types of interrupt coalescing.
596   * @supported_ring_params: supported ring params.
597   * @get_drvinfo: Report driver/device information. Modern drivers no
598   *	longer have to implement this callback. Most fields are
599   *	correctly filled in by the core using system information, or
600   *	populated using other driver operations.
601   * @get_regs_len: Get buffer length required for @get_regs
602   * @get_regs: Get device registers
603   * @get_wol: Report whether Wake-on-Lan is enabled
604   * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
605   *	or zero.
606   * @get_msglevel: Report driver message level.  This should be the value
607   *	of the @msg_enable field used by netif logging functions.
608   * @set_msglevel: Set driver message level
609   * @nway_reset: Restart autonegotiation.  Returns a negative error code
610   *	or zero.
611   * @get_link: Report whether physical link is up.  Will only be called if
612   *	the netdev is up.  Should usually be set to ethtool_op_get_link(),
613   *	which uses netif_carrier_ok().
614   * @get_link_ext_state: Report link extended state. Should set link_ext_state and
615   *	link_ext_substate (link_ext_substate of 0 means link_ext_substate is unknown,
616   *	do not attach ext_substate attribute to netlink message). If link_ext_state
617   *	and link_ext_substate are unknown, return -ENODATA. If not implemented,
618   *	link_ext_state and link_ext_substate will not be sent to userspace.
619   * @get_link_ext_stats: Read extra link-related counters.
620   * @get_eeprom_len: Read range of EEPROM addresses for validation of
621   *	@get_eeprom and @set_eeprom requests.
622   *	Returns 0 if device does not support EEPROM access.
623   * @get_eeprom: Read data from the device EEPROM.
624   *	Should fill in the magic field.  Don't need to check len for zero
625   *	or wraparound.  Fill in the data argument with the eeprom values
626   *	from offset to offset + len.  Update len to the amount read.
627   *	Returns an error or zero.
628   * @set_eeprom: Write data to the device EEPROM.
629   *	Should validate the magic field.  Don't need to check len for zero
630   *	or wraparound.  Update len to the amount written.  Returns an error
631   *	or zero.
632   * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
633   *	error code or zero.
634   * @set_coalesce: Set interrupt coalescing parameters.  Supported coalescing
635   *	types should be set in @supported_coalesce_params.
636   *	Returns a negative error code or zero.
637   * @get_ringparam: Report ring sizes
638   * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
639   * @get_pause_stats: Report pause frame statistics. Drivers must not zero
640   *	statistics which they don't report. The stats structure is initialized
641   *	to ETHTOOL_STAT_NOT_SET indicating driver does not report statistics.
642   * @get_pauseparam: Report pause parameters
643   * @set_pauseparam: Set pause parameters.  Returns a negative error code
644   *	or zero.
645   * @self_test: Run specified self-tests
646   * @get_strings: Return a set of strings that describe the requested objects
647   * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
648   *	attached to it.  The implementation may update the indicator
649   *	asynchronously or synchronously, but in either case it must return
650   *	quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
651   *	and must either activate asynchronous updates and return zero, return
652   *	a negative error or return a positive frequency for synchronous
653   *	indication (e.g. 1 for one on/off cycle per second).  If it returns
654   *	a frequency then it will be called again at intervals with the
655   *	argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
656   *	the indicator accordingly.  Finally, it is called with the argument
657   *	%ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
658   *	negative error code or zero.
659   * @get_ethtool_stats: Return extended statistics about the device.
660   *	This is only useful if the device maintains statistics not
661   *	included in &struct rtnl_link_stats64.
662   * @begin: Function to be called before any other operation.  Returns a
663   *	negative error code or zero.
664   * @complete: Function to be called after any other operation except
665   *	@begin.  Will be called even if the other operation failed.
666   * @get_priv_flags: Report driver-specific feature flags.
667   * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
668   *	error code or zero.
669   * @get_sset_count: Get number of strings that @get_strings will write.
670   * @get_rxnfc: Get RX flow classification rules.  Returns a negative
671   *	error code or zero.
672   * @set_rxnfc: Set RX flow classification rules.  Returns a negative
673   *	error code or zero.
674   * @flash_device: Write a firmware image to device's flash memory.
675   *	Returns a negative error code or zero.
676   * @reset: Reset (part of) the device, as specified by a bitmask of
677   *	flags from &enum ethtool_reset_flags.  Returns a negative
678   *	error code or zero.
679   * @get_rxfh_key_size: Get the size of the RX flow hash key.
680   *	Returns zero if not supported for this specific device.
681   * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
682   *	Returns zero if not supported for this specific device.
683   * @get_rxfh: Get the contents of the RX flow hash indirection table, hash key
684   *	and/or hash function.
685   *	Returns a negative error code or zero.
686   * @set_rxfh: Set the contents of the RX flow hash indirection table, hash
687   *	key, and/or hash function.  Arguments which are set to %NULL or zero
688   *	will remain unchanged.
689   *	Returns a negative error code or zero. An error code must be returned
690   *	if at least one unsupported change was requested.
691   * @get_rxfh_context: Get the contents of the RX flow hash indirection table,
692   *	hash key, and/or hash function assiciated to the given rss context.
693   *	Returns a negative error code or zero.
694   * @set_rxfh_context: Create, remove and configure RSS contexts. Allows setting
695   *	the contents of the RX flow hash indirection table, hash key, and/or
696   *	hash function associated to the given context. Arguments which are set
697   *	to %NULL or zero will remain unchanged.
698   *	Returns a negative error code or zero. An error code must be returned
699   *	if at least one unsupported change was requested.
700   * @get_channels: Get number of channels.
701   * @set_channels: Set number of channels.  Returns a negative error code or
702   *	zero.
703   * @get_dump_flag: Get dump flag indicating current dump length, version,
704   * 		   and flag of the device.
705   * @get_dump_data: Get dump data.
706   * @set_dump: Set dump specific flags to the device.
707   * @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
708   *	Drivers supporting transmit time stamps in software should set this to
709   *	ethtool_op_get_ts_info().
710   * @get_module_info: Get the size and type of the eeprom contained within
711   *	a plug-in module.
712   * @get_module_eeprom: Get the eeprom information from the plug-in module
713   * @get_eee: Get Energy-Efficient (EEE) supported and status.
714   * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
715   * @get_tunable: Read the value of a driver / device tunable.
716   * @set_tunable: Set the value of a driver / device tunable.
717   * @get_per_queue_coalesce: Get interrupt coalescing parameters per queue.
718   *	It must check that the given queue number is valid. If neither a RX nor
719   *	a TX queue has this number, return -EINVAL. If only a RX queue or a TX
720   *	queue has this number, set the inapplicable fields to ~0 and return 0.
721   *	Returns a negative error code or zero.
722   * @set_per_queue_coalesce: Set interrupt coalescing parameters per queue.
723   *	It must check that the given queue number is valid. If neither a RX nor
724   *	a TX queue has this number, return -EINVAL. If only a RX queue or a TX
725   *	queue has this number, ignore the inapplicable fields. Supported
726   *	coalescing types should be set in @supported_coalesce_params.
727   *	Returns a negative error code or zero.
728   * @get_link_ksettings: Get various device settings including Ethernet link
729   *	settings. The %cmd and %link_mode_masks_nwords fields should be
730   *	ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
731   *	any change to them will be overwritten by kernel. Returns a negative
732   *	error code or zero.
733   * @set_link_ksettings: Set various device settings including Ethernet link
734   *	settings. The %cmd and %link_mode_masks_nwords fields should be
735   *	ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
736   *	any change to them will be overwritten by kernel. Returns a negative
737   *	error code or zero.
738   * @get_fec_stats: Report FEC statistics.
739   *	Core will sum up per-lane stats to get the total.
740   *	Drivers must not zero statistics which they don't report. The stats
741   *	structure is initialized to ETHTOOL_STAT_NOT_SET indicating driver does
742   *	not report statistics.
743   * @get_fecparam: Get the network device Forward Error Correction parameters.
744   * @set_fecparam: Set the network device Forward Error Correction parameters.
745   * @get_ethtool_phy_stats: Return extended statistics about the PHY device.
746   *	This is only useful if the device maintains PHY statistics and
747   *	cannot use the standard PHY library helpers.
748   * @get_phy_tunable: Read the value of a PHY tunable.
749   * @set_phy_tunable: Set the value of a PHY tunable.
750   * @get_module_eeprom_by_page: Get a region of plug-in module EEPROM data from
751   *	specified page. Returns a negative error code or the amount of bytes
752   *	read.
753   * @get_eth_phy_stats: Query some of the IEEE 802.3 PHY statistics.
754   * @get_eth_mac_stats: Query some of the IEEE 802.3 MAC statistics.
755   * @get_eth_ctrl_stats: Query some of the IEEE 802.3 MAC Ctrl statistics.
756   * @get_rmon_stats: Query some of the RMON (RFC 2819) statistics.
757   *	Set %ranges to a pointer to zero-terminated array of byte ranges.
758   * @get_module_power_mode: Get the power mode policy for the plug-in module
759   *	used by the network device and its operational power mode, if
760   *	plugged-in.
761   * @set_module_power_mode: Set the power mode policy for the plug-in module
762   *	used by the network device.
763   * @get_mm: Query the 802.3 MAC Merge layer state.
764   * @set_mm: Set the 802.3 MAC Merge layer parameters.
765   * @get_mm_stats: Query the 802.3 MAC Merge layer statistics.
766   *
767   * All operations are optional (i.e. the function pointer may be set
768   * to %NULL) and callers must take this into account.  Callers must
769   * hold the RTNL lock.
770   *
771   * See the structures used by these operations for further documentation.
772   * Note that for all operations using a structure ending with a zero-
773   * length array, the array is allocated separately in the kernel and
774   * is passed to the driver as an additional parameter.
775   *
776   * See &struct net_device and &struct net_device_ops for documentation
777   * of the generic netdev features interface.
778   */
779  struct ethtool_ops {
780  	u32     cap_link_lanes_supported:1;
781  	u32	supported_coalesce_params;
782  	u32	supported_ring_params;
783  	void	(*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
784  	int	(*get_regs_len)(struct net_device *);
785  	void	(*get_regs)(struct net_device *, struct ethtool_regs *, void *);
786  	void	(*get_wol)(struct net_device *, struct ethtool_wolinfo *);
787  	int	(*set_wol)(struct net_device *, struct ethtool_wolinfo *);
788  	u32	(*get_msglevel)(struct net_device *);
789  	void	(*set_msglevel)(struct net_device *, u32);
790  	int	(*nway_reset)(struct net_device *);
791  	u32	(*get_link)(struct net_device *);
792  	int	(*get_link_ext_state)(struct net_device *,
793  				      struct ethtool_link_ext_state_info *);
794  	void	(*get_link_ext_stats)(struct net_device *dev,
795  				      struct ethtool_link_ext_stats *stats);
796  	int	(*get_eeprom_len)(struct net_device *);
797  	int	(*get_eeprom)(struct net_device *,
798  			      struct ethtool_eeprom *, u8 *);
799  	int	(*set_eeprom)(struct net_device *,
800  			      struct ethtool_eeprom *, u8 *);
801  	int	(*get_coalesce)(struct net_device *,
802  				struct ethtool_coalesce *,
803  				struct kernel_ethtool_coalesce *,
804  				struct netlink_ext_ack *);
805  	int	(*set_coalesce)(struct net_device *,
806  				struct ethtool_coalesce *,
807  				struct kernel_ethtool_coalesce *,
808  				struct netlink_ext_ack *);
809  	void	(*get_ringparam)(struct net_device *,
810  				 struct ethtool_ringparam *,
811  				 struct kernel_ethtool_ringparam *,
812  				 struct netlink_ext_ack *);
813  	int	(*set_ringparam)(struct net_device *,
814  				 struct ethtool_ringparam *,
815  				 struct kernel_ethtool_ringparam *,
816  				 struct netlink_ext_ack *);
817  	void	(*get_pause_stats)(struct net_device *dev,
818  				   struct ethtool_pause_stats *pause_stats);
819  	void	(*get_pauseparam)(struct net_device *,
820  				  struct ethtool_pauseparam*);
821  	int	(*set_pauseparam)(struct net_device *,
822  				  struct ethtool_pauseparam*);
823  	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
824  	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
825  	int	(*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
826  	void	(*get_ethtool_stats)(struct net_device *,
827  				     struct ethtool_stats *, u64 *);
828  	int	(*begin)(struct net_device *);
829  	void	(*complete)(struct net_device *);
830  	u32	(*get_priv_flags)(struct net_device *);
831  	int	(*set_priv_flags)(struct net_device *, u32);
832  	int	(*get_sset_count)(struct net_device *, int);
833  	int	(*get_rxnfc)(struct net_device *,
834  			     struct ethtool_rxnfc *, u32 *rule_locs);
835  	int	(*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
836  	int	(*flash_device)(struct net_device *, struct ethtool_flash *);
837  	int	(*reset)(struct net_device *, u32 *);
838  	u32	(*get_rxfh_key_size)(struct net_device *);
839  	u32	(*get_rxfh_indir_size)(struct net_device *);
840  	int	(*get_rxfh)(struct net_device *, u32 *indir, u8 *key,
841  			    u8 *hfunc);
842  	int	(*set_rxfh)(struct net_device *, const u32 *indir,
843  			    const u8 *key, const u8 hfunc);
844  	int	(*get_rxfh_context)(struct net_device *, u32 *indir, u8 *key,
845  				    u8 *hfunc, u32 rss_context);
846  	int	(*set_rxfh_context)(struct net_device *, const u32 *indir,
847  				    const u8 *key, const u8 hfunc,
848  				    u32 *rss_context, bool delete);
849  	void	(*get_channels)(struct net_device *, struct ethtool_channels *);
850  	int	(*set_channels)(struct net_device *, struct ethtool_channels *);
851  	int	(*get_dump_flag)(struct net_device *, struct ethtool_dump *);
852  	int	(*get_dump_data)(struct net_device *,
853  				 struct ethtool_dump *, void *);
854  	int	(*set_dump)(struct net_device *, struct ethtool_dump *);
855  	int	(*get_ts_info)(struct net_device *, struct ethtool_ts_info *);
856  	int     (*get_module_info)(struct net_device *,
857  				   struct ethtool_modinfo *);
858  	int     (*get_module_eeprom)(struct net_device *,
859  				     struct ethtool_eeprom *, u8 *);
860  	int	(*get_eee)(struct net_device *, struct ethtool_eee *);
861  	int	(*set_eee)(struct net_device *, struct ethtool_eee *);
862  	int	(*get_tunable)(struct net_device *,
863  			       const struct ethtool_tunable *, void *);
864  	int	(*set_tunable)(struct net_device *,
865  			       const struct ethtool_tunable *, const void *);
866  	int	(*get_per_queue_coalesce)(struct net_device *, u32,
867  					  struct ethtool_coalesce *);
868  	int	(*set_per_queue_coalesce)(struct net_device *, u32,
869  					  struct ethtool_coalesce *);
870  	int	(*get_link_ksettings)(struct net_device *,
871  				      struct ethtool_link_ksettings *);
872  	int	(*set_link_ksettings)(struct net_device *,
873  				      const struct ethtool_link_ksettings *);
874  	void	(*get_fec_stats)(struct net_device *dev,
875  				 struct ethtool_fec_stats *fec_stats);
876  	int	(*get_fecparam)(struct net_device *,
877  				      struct ethtool_fecparam *);
878  	int	(*set_fecparam)(struct net_device *,
879  				      struct ethtool_fecparam *);
880  	void	(*get_ethtool_phy_stats)(struct net_device *,
881  					 struct ethtool_stats *, u64 *);
882  	int	(*get_phy_tunable)(struct net_device *,
883  				   const struct ethtool_tunable *, void *);
884  	int	(*set_phy_tunable)(struct net_device *,
885  				   const struct ethtool_tunable *, const void *);
886  	int	(*get_module_eeprom_by_page)(struct net_device *dev,
887  					     const struct ethtool_module_eeprom *page,
888  					     struct netlink_ext_ack *extack);
889  	void	(*get_eth_phy_stats)(struct net_device *dev,
890  				     struct ethtool_eth_phy_stats *phy_stats);
891  	void	(*get_eth_mac_stats)(struct net_device *dev,
892  				     struct ethtool_eth_mac_stats *mac_stats);
893  	void	(*get_eth_ctrl_stats)(struct net_device *dev,
894  				      struct ethtool_eth_ctrl_stats *ctrl_stats);
895  	void	(*get_rmon_stats)(struct net_device *dev,
896  				  struct ethtool_rmon_stats *rmon_stats,
897  				  const struct ethtool_rmon_hist_range **ranges);
898  	int	(*get_module_power_mode)(struct net_device *dev,
899  					 struct ethtool_module_power_mode_params *params,
900  					 struct netlink_ext_ack *extack);
901  	int	(*set_module_power_mode)(struct net_device *dev,
902  					 const struct ethtool_module_power_mode_params *params,
903  					 struct netlink_ext_ack *extack);
904  	int	(*get_mm)(struct net_device *dev, struct ethtool_mm_state *state);
905  	int	(*set_mm)(struct net_device *dev, struct ethtool_mm_cfg *cfg,
906  			  struct netlink_ext_ack *extack);
907  	void	(*get_mm_stats)(struct net_device *dev, struct ethtool_mm_stats *stats);
908  };
909  
910  int ethtool_check_ops(const struct ethtool_ops *ops);
911  
912  struct ethtool_rx_flow_rule {
913  	struct flow_rule	*rule;
914  	unsigned long		priv[];
915  };
916  
917  struct ethtool_rx_flow_spec_input {
918  	const struct ethtool_rx_flow_spec	*fs;
919  	u32					rss_ctx;
920  };
921  
922  struct ethtool_rx_flow_rule *
923  ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input *input);
924  void ethtool_rx_flow_rule_destroy(struct ethtool_rx_flow_rule *rule);
925  
926  bool ethtool_virtdev_validate_cmd(const struct ethtool_link_ksettings *cmd);
927  int ethtool_virtdev_set_link_ksettings(struct net_device *dev,
928  				       const struct ethtool_link_ksettings *cmd,
929  				       u32 *dev_speed, u8 *dev_duplex);
930  
931  struct phy_device;
932  struct phy_tdr_config;
933  struct phy_plca_cfg;
934  struct phy_plca_status;
935  
936  /**
937   * struct ethtool_phy_ops - Optional PHY device options
938   * @get_sset_count: Get number of strings that @get_strings will write.
939   * @get_strings: Return a set of strings that describe the requested objects
940   * @get_stats: Return extended statistics about the PHY device.
941   * @get_plca_cfg: Return PLCA configuration.
942   * @set_plca_cfg: Set PLCA configuration.
943   * @get_plca_status: Get PLCA configuration.
944   * @start_cable_test: Start a cable test
945   * @start_cable_test_tdr: Start a Time Domain Reflectometry cable test
946   *
947   * All operations are optional (i.e. the function pointer may be set to %NULL)
948   * and callers must take this into account. Callers must hold the RTNL lock.
949   */
950  struct ethtool_phy_ops {
951  	int (*get_sset_count)(struct phy_device *dev);
952  	int (*get_strings)(struct phy_device *dev, u8 *data);
953  	int (*get_stats)(struct phy_device *dev,
954  			 struct ethtool_stats *stats, u64 *data);
955  	int (*get_plca_cfg)(struct phy_device *dev,
956  			    struct phy_plca_cfg *plca_cfg);
957  	int (*set_plca_cfg)(struct phy_device *dev,
958  			    const struct phy_plca_cfg *plca_cfg,
959  			    struct netlink_ext_ack *extack);
960  	int (*get_plca_status)(struct phy_device *dev,
961  			       struct phy_plca_status *plca_st);
962  	int (*start_cable_test)(struct phy_device *phydev,
963  				struct netlink_ext_ack *extack);
964  	int (*start_cable_test_tdr)(struct phy_device *phydev,
965  				    struct netlink_ext_ack *extack,
966  				    const struct phy_tdr_config *config);
967  };
968  
969  /**
970   * ethtool_set_ethtool_phy_ops - Set the ethtool_phy_ops singleton
971   * @ops: Ethtool PHY operations to set
972   */
973  void ethtool_set_ethtool_phy_ops(const struct ethtool_phy_ops *ops);
974  
975  /**
976   * ethtool_params_from_link_mode - Derive link parameters from a given link mode
977   * @link_ksettings: Link parameters to be derived from the link mode
978   * @link_mode: Link mode
979   */
980  void
981  ethtool_params_from_link_mode(struct ethtool_link_ksettings *link_ksettings,
982  			      enum ethtool_link_mode_bit_indices link_mode);
983  
984  /**
985   * ethtool_get_phc_vclocks - Derive phc vclocks information, and caller
986   *                           is responsible to free memory of vclock_index
987   * @dev: pointer to net_device structure
988   * @vclock_index: pointer to pointer of vclock index
989   *
990   * Return number of phc vclocks
991   */
992  int ethtool_get_phc_vclocks(struct net_device *dev, int **vclock_index);
993  
994  /* Some generic methods drivers may use in their ethtool_ops */
995  u32 ethtool_op_get_link(struct net_device *dev);
996  int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti);
997  
998  /**
999   * ethtool_mm_frag_size_add_to_min - Translate (standard) additional fragment
1000   *	size expressed as multiplier into (absolute) minimum fragment size
1001   *	value expressed in octets
1002   * @val_add: Value of addFragSize multiplier
1003   */
ethtool_mm_frag_size_add_to_min(u32 val_add)1004  static inline u32 ethtool_mm_frag_size_add_to_min(u32 val_add)
1005  {
1006  	return (ETH_ZLEN + ETH_FCS_LEN) * (1 + val_add) - ETH_FCS_LEN;
1007  }
1008  
1009  /**
1010   * ethtool_mm_frag_size_min_to_add - Translate (absolute) minimum fragment size
1011   *	expressed in octets into (standard) additional fragment size expressed
1012   *	as multiplier
1013   * @val_min: Value of addFragSize variable in octets
1014   * @val_add: Pointer where the standard addFragSize value is to be returned
1015   * @extack: Netlink extended ack
1016   *
1017   * Translate a value in octets to one of 0, 1, 2, 3 according to the reverse
1018   * application of the 802.3 formula 64 * (1 + addFragSize) - 4. To be called
1019   * by drivers which do not support programming the minimum fragment size to a
1020   * continuous range. Returns error on other fragment length values.
1021   */
ethtool_mm_frag_size_min_to_add(u32 val_min,u32 * val_add,struct netlink_ext_ack * extack)1022  static inline int ethtool_mm_frag_size_min_to_add(u32 val_min, u32 *val_add,
1023  						  struct netlink_ext_ack *extack)
1024  {
1025  	u32 add_frag_size;
1026  
1027  	for (add_frag_size = 0; add_frag_size < 4; add_frag_size++) {
1028  		if (ethtool_mm_frag_size_add_to_min(add_frag_size) == val_min) {
1029  			*val_add = add_frag_size;
1030  			return 0;
1031  		}
1032  	}
1033  
1034  	NL_SET_ERR_MSG_MOD(extack,
1035  			   "minFragSize required to be one of 60, 124, 188 or 252");
1036  	return -EINVAL;
1037  }
1038  
1039  /**
1040   * ethtool_sprintf - Write formatted string to ethtool string data
1041   * @data: Pointer to start of string to update
1042   * @fmt: Format of string to write
1043   *
1044   * Write formatted string to data. Update data to point at start of
1045   * next string.
1046   */
1047  extern __printf(2, 3) void ethtool_sprintf(u8 **data, const char *fmt, ...);
1048  #endif /* _LINUX_ETHTOOL_H */
1049