1 /* SPDX-License-Identifier: GPL-2.0+ 2 * 3 * Copyright (c) 2021 Linumiz 4 * Author: Navin Sankar Velliangiri <navin@linumiz.com> 5 */ 6 7 #ifndef _NPI_IMX6ULL_H 8 #define _NPI_IMX6ULL_H 9 10 #include <linux/sizes.h> 11 #include "mx6_common.h" 12 13 /* SPL options */ 14 #include "imx6_spl.h" 15 16 #define CONFIG_SYS_FSL_USDHC_NUM 1 17 18 /* Console configs */ 19 #define CONFIG_MXC_UART_BASE UART1_BASE 20 21 /* MMC Configs */ 22 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR 23 24 #define CONFIG_NETMASK 255.255.255.0 25 26 #define CONFIG_SYS_HZ 1000 27 28 /* Physical Memory Map */ 29 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 30 31 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 32 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 33 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 34 35 #define CONFIG_SYS_INIT_SP_OFFSET \ 36 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 37 #define CONFIG_SYS_INIT_SP_ADDR \ 38 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 39 40 /* environment settings */ 41 #if defined(CONFIG_ENV_IS_IN_MMC) 42 #define CONFIG_SYS_MMC_ENV_DEV 0 43 #elif defined(CONFIG_ENV_IS_IN_NAND) 44 #undef CONFIG_ENV_SIZE 45 #define CONFIG_ENV_SECT_SIZE (128 << 10) 46 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 47 #endif 48 49 /* NAND */ 50 #define CONFIG_SYS_MAX_NAND_DEVICE 1 51 #define CONFIG_SYS_NAND_BASE 0x40000000 52 53 /* USB Configs */ 54 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 55 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 56 #define CONFIG_MXC_USB_FLAGS 0 57 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 58 59 #ifdef CONFIG_CMD_NET 60 #define IMX_FEC_BASE ENET_BASE_ADDR 61 #define CONFIG_FEC_MXC_PHYADDR 0x1 62 #define CONFIG_FEC_XCV_TYPE RMII 63 #define CONFIG_ETHPRIME "eth0" 64 #endif 65 66 #define CONFIG_IMX_THERMAL 67 68 #define CONFIG_FEC_ENET_DEV 1 69 70 #define CONFIG_EXTRA_ENV_SETTINGS \ 71 "console=ttymxc0,115200n8\0" \ 72 "image=zImage\0" \ 73 "fdtfile=imx6ull-seeed-npi-dev-board.dtb\0" \ 74 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ 75 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ 76 "fdt_addr_r=0x82000000\0" \ 77 "kernel_addr_r=0x81000000\0" \ 78 "pxefile_addr_r=0x87100000\0" \ 79 "ramdisk_addr_r=0x82100000\0" \ 80 "scriptaddr=0x87000000\0" \ 81 "root=/dev/mmcblk0p2 rootwait\0" \ 82 BOOTENV 83 84 #define BOOT_TARGET_DEVICES(func) \ 85 func(MMC, mmc, 0) \ 86 func(UBIFS, ubifs, 0) \ 87 func(PXE, pxe, na) \ 88 func(DHCP, dhcp, na) 89 90 #include <config_distro_bootcmd.h> 91 92 #endif /* _NPI_IMX6ULL_H */ 93