1 /*
2 * sun50i H6 DDR3-1333 timings, as programmed by Allwinner's boot0
3 * for some TV boxes with the H6 and DDR3 memory.
4 *
5 * The chips are probably able to be driven by a faster clock, but boot0
6 * uses a more conservative timing (as usual).
7 *
8 * (C) Copyright 2018,2019 Arm Ltd.
9 * based on previous work by:
10 * (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
11 *
12 * References used:
13 * - JEDEC DDR3 SDRAM standard: JESD79-3F.pdf
14 * - Samsung K4B2G0446D datasheet
15 * - ZynqMP UG1087 register DDRC/PHY documentation
16 *
17 * Many thanks to Jernej Skrabec for contributing some fixes!
18 *
19 * SPDX-License-Identifier: GPL-2.0+
20 */
21
22 #include <common.h>
23 #include <asm/arch/dram.h>
24 #include <asm/arch/cpu.h>
25
26 /*
27 * Only the first four are used for DDR3(?)
28 * MR0: BL8, seq. read burst, no test, fast exit (DLL on), no DLL reset,
29 * CAS latency (CL): 11, write recovery (WR): 12
30 * MR1: DLL enabled, output strength RZQ/6, Rtt_norm RZQ/2,
31 * write levelling disabled, TDQS disabled, output buffer enabled
32 * MR2: manual full array self refresh, dynamic ODT off,
33 * CAS write latency (CWL): 8
34 */
35 static u32 mr_ddr3[7] = {
36 0x00001c70, 0x00000040, 0x00000018, 0x00000000,
37 0x00000000, 0x00000400, 0x00000848,
38 };
39
40 /* TODO: flexible timing */
mctl_set_timing_params(struct dram_para * para)41 void mctl_set_timing_params(struct dram_para *para)
42 {
43 struct sunxi_mctl_ctl_reg * const mctl_ctl =
44 (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
45 struct sunxi_mctl_phy_reg * const mctl_phy =
46 (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
47 int i;
48
49 u8 tccd = 2; /* JEDEC: 4nCK */
50 u8 tfaw = ns_to_t(50); /* JEDEC: 30 ns w/ 1K pages */
51 u8 trrd = max(ns_to_t(6), 4); /* JEDEC: max(6 ns, 4nCK) */
52 u8 trcd = ns_to_t(15); /* JEDEC: 13.5 ns */
53 u8 trc = ns_to_t(53); /* JEDEC: 49.5 ns */
54 u8 txp = max(ns_to_t(6), 3); /* JEDEC: max(6 ns, 3nCK) */
55 u8 twtr = max(ns_to_t(8), 2); /* JEDEC: max(7.5 ns, 4nCK) */
56 u8 trtp = max(ns_to_t(8), 2); /* JEDEC: max(7.5 ns, 4nCK) */
57 u8 twr = ns_to_t(15); /* JEDEC: 15 ns */
58 u8 trp = ns_to_t(15); /* JEDEC: >= 13.75 ns */
59 u8 tras = ns_to_t(38); /* JEDEC >= 36 ns, <= 9*trefi */
60 u8 twtr_sa = 2; /* ? */
61 u8 tcksrea = 4; /* ? */
62 u16 trefi = ns_to_t(7800) / 32; /* JEDEC: 7.8us@Tcase <= 85C */
63 u16 trfc = ns_to_t(350); /* JEDEC: 160 ns for 2Gb */
64 u16 txsr = 4; /* ? */
65
66 u8 tmrw = 0; /* ? */
67 u8 tmrd = 4; /* JEDEC: 4nCK */
68 u8 tmod = max(ns_to_t(15), 12); /* JEDEC: max(15 ns, 12nCK) */
69 u8 tcke = max(ns_to_t(6), 3); /* JEDEC: max(5.625 ns, 3nCK) */
70 u8 tcksrx = max(ns_to_t(10), 5); /* JEDEC: max(10 ns, 5nCK) */
71 u8 tcksre = max(ns_to_t(10), 5); /* JEDEC: max(10 ns, 5nCK) */
72 u8 tckesr = tcke + 1; /* JEDEC: tCKE(min) + 1nCK */
73 u8 trasmax = 24; /* JEDEC: tREFI * 9 */
74 u8 txs = ns_to_t(360) / 32; /* JEDEC: max(5nCK,tRFC+10ns) */
75 u8 txsdll = 4; /* JEDEC: 512 nCK */
76 u8 txsabort = 4; /* ? */
77 u8 txsfast = 4; /* ? */
78 u8 tcl = 6; /* JEDEC: CL / 2 => 6 */
79 u8 tcwl = 4; /* JEDEC: 8 */
80 u8 t_rdata_en = 7; /* ? */
81
82 u32 tdinit0 = (500 * CONFIG_DRAM_CLK) + 1; /* 500us */
83 u32 tdinit1 = (360 * CONFIG_DRAM_CLK) / 1000 + 1;
84 u32 tdinit2 = (200 * CONFIG_DRAM_CLK) + 1;
85 u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */
86
87 u8 twtp = tcwl + 2 + twr; /* (WL + BL / 2 + tWR) / 2 */
88 u8 twr2rd = tcwl + 2 + twtr; /* (WL + BL / 2 + tWTR) / 2 */
89 u8 trd2wr = 5; /* (RL + BL / 2 + 2 - WL) / 2 */
90
91 if (tcl + 1 >= trtp + trp)
92 trtp = tcl + 2 - trp;
93
94 /* set mode registers */
95 for (i = 0; i < ARRAY_SIZE(mr_ddr3); i++)
96 writel(mr_ddr3[i], &mctl_phy->mr[i]);
97
98 /* set DRAM timing */
99 writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras,
100 &mctl_ctl->dramtmg[0]);
101 writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]);
102 writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd,
103 &mctl_ctl->dramtmg[2]);
104 writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]);
105 writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp,
106 &mctl_ctl->dramtmg[4]);
107 writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke,
108 &mctl_ctl->dramtmg[5]);
109 /* Value suggested by ZynqMP manual and used by libdram */
110 writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]);
111 writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs,
112 &mctl_ctl->dramtmg[8]);
113 writel(txsr, &mctl_ctl->dramtmg[14]);
114
115 clrsetbits_le32(&mctl_ctl->init[0], (3 << 30), (1 << 30));
116 writel(0, &mctl_ctl->dfimisc);
117 clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660);
118
119 /*
120 * Set timing registers of the PHY.
121 * Note: the PHY is clocked 2x from the DRAM frequency.
122 */
123 writel((trrd << 25) | (tras << 17) | (trp << 9) | (trtp << 1),
124 &mctl_phy->dtpr[0]);
125 writel((tfaw << 17) | 0x28000400 | (tmrd << 1), &mctl_phy->dtpr[1]);
126 writel(((txs << 6) - 1) | (tcke << 17), &mctl_phy->dtpr[2]);
127 writel(((txsdll << 22) - (0x1 << 16)) | twtr_sa | (tcksrea << 8),
128 &mctl_phy->dtpr[3]);
129 writel((txp << 1) | (trfc << 17) | 0x800, &mctl_phy->dtpr[4]);
130 writel((trc << 17) | (trcd << 9) | (twtr << 1), &mctl_phy->dtpr[5]);
131 writel(0x0505, &mctl_phy->dtpr[6]);
132
133 /* Configure DFI timing */
134 writel(tcl | 0x2000200 | (t_rdata_en << 16) | 0x808000,
135 &mctl_ctl->dfitmg0);
136 writel(0x040201, &mctl_ctl->dfitmg1);
137
138 /* Configure PHY timing. Zynq uses different registers. */
139 writel(tdinit0 | (tdinit1 << 20), &mctl_phy->ptr[3]);
140 writel(tdinit2 | (tdinit3 << 18), &mctl_phy->ptr[4]);
141
142 /* set refresh timing */
143 writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg);
144 }
145